Módulo:Graph/doc

Related pages
Template (talk) Template sandbox Template testcases Template doc Template subpages Module (talk) Module sandbox Module testcases Module doc Module subpages

Module with helper functions for the Graph extension to display graphs and maps. From de:Modul:Graph.

Functions for templates

map

Creates a JSON object for <graph> to display a political map with colored highlights. In the article namespace the template {{Graph:Map}} should be used instead. See its page for use cases.

Maps can be found at Special:Prefixindex/Template:Graph:Map/Inner/ (for example Worldmap2c-json with country borders) and new maps should also be saved under Module:Graph/.

Parameters:

• basemap: sets the base map. The map definitions must follow the TopoJSON format and if saved in Wikipedia are available for this module. Maps in the default directory Special:Prefixindex/Template:Graph:Map/Inner/ like Worldmap2c-json should only be referenced by their name while omitting the Modul:Graph/ prefix to allow better portability. The parameter also accepts URLs, e.g. maps from other Wikipedia versions (the link should follow the scheme of //en.wikipedia.org/w/index.php?title=mapname&action=raw, i.e. protocol-relative without leading http/s and a trailing action=raw to fetch the raw content only). URLs to maps on external sites should be avoided for the sake of link stability, performance, security, and she be assumed to be blocked by the software or browser anyway.
• scale: the scaling factor of the map (default: 100)
• projection: the map projection to use. Supported values are listed at https://github.com/mbostock/d3/wiki/Geo-Projections. The default value is equirectangular for an equirectangular projection.
• center: map center (corresponds in the map data to both comma-separated values of the scale field)
• feature: which geographic objects should be displayed (corresponds in the map data to the name of the field under the objects field). The default is value countries.
• ids of geographic entities: The actual parameter names depend on the base map and the selected feature. For example, for the above mentioned world map the ids are ISO country codes. The values can be either colors or numbers in case the geographic entities should be associated with numeric data: DE=lightblue marks Germany in light blue color, and DE=80.6 assigns Germany the value 80.6 (population in millions). In the latter case, the actual color depends on the following parameters.
• colorScale: the color palette to use for the color scale. The palette must be provided as a comma-separated list of color values. The color values must be given either as #rgb/#rrggbb or by a CSS color name. Instead of a list, the built-in color palettes category10 and category20 can also be used.
• scaleType: supported values are linear for a linear mapping between the data values and the color scale, log for a log mapping, pow for a power mapping (the exponent can be provided as pow 0.5), sqrt for a square-root mapping, and quantize for a quantized scale, i.e. the data is grouped in as many classes as the color palette has colors.
• domainMin: lower boundary of the data values, i.e. smaller data values are mapped to the lower boundary
• domainMax: upper boundary of the data values, i.e. larger data values are mapped to the upper boundary
• legend: show color legend (does not work with quantize)
• defaultValue: default value for unused geographic entities. In case the id values are colors the default value is silver, in case of numbers it is 0.
• formatjson: format JSON object for better legibility

chart

Creates a JSON object for <graph> to display charts. In the article namespace the template Template:Graph:Chart should be used instead. See its page for use cases.

Parameters:

• width: width of the chart
• height: height of the chart
• type: type of the chart: line for line charts, area for area charts, and rect for (column) bar charts, and pie for pie charts. Multiple series can stacked using the stacked prefix, e.g. stackedarea.
• interpolate: interpolation method for line and area charts. It is recommended to use monotone for a monotone cubic interpolation – further supported values are listed at https://github.com/vega/vega/wiki/Marks#area.
• colors: color palette of the chart as a comma-separated list of colors. The color values must be given either as #rgb/#rrggbb/#aarrggbb or by a CSS color name. For #aarrggbb the aa component denotes the alpha channel, i.e. FF=100% opacity, 80=50% opacity/transparency, etc. (The default color palette if n <= 10 is Category10:                                         else is Category20:                                                                                ).
• xAxisTitle and yAxisTitle: captions of the x and y axes
• xAxisMin, xAxisMax, yAxisMin, and yAxisMax: minimum and maximum values of the x and y axes (not yet supported for bar charts). These parameters can be used to invert the scale of a numeric axis by setting the lowest value to the Max and highest value to the Min.
• xAxisFormat and yAxisFormat: changes the formatting of the axis labels. Supported values are listed at https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#numbers for numbers and https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md for date/time. For example, the format % can be used to output percentages.
• xAxisAngle: rotates the x axis labels by the specified angle. Recommended values are: -45, +45, -90, +90
• xType and yType: data types of the values, e.g. integer for integers, number for real numbers, date for dates (e.g. YYYY/MM/DD), and string for ordinal values (use string to prevent axis values from being repeated when there are only a few values).
• xScaleType and yScaleType: scale types of the x and y axes, e.g. linear for linear scale (default), log for logarithmic scale and sqrt for square root scale.
• x: the x-values as a comma-separated list
• y or y1, y2, …: the y-values for one or several data series, respectively. For pie charts y2 denotes the radiuses of the corresponding sectors.
• legend: show legend (only works in case of multiple data series)
• y1Title, y2Title, …: defines the label of the respective data series in the legend
• linewidth: line width for line charts or distance between the pie segments for pie charts. Setting to 0 with type=line creates a scatter plot.
• linewidths: different line widths may be defined for each series of data with csv, if set to 0 with "showSymbols" results with points graph, eg.: linewidths=1, 0, 5, 0.2
• showSymbols: show symbol on data point for line graphs, if number is provided it's size of symbol, default 2.5. may be defined for each series of data with csv, eg.: showSymbols=1, 2, 3, 4
• symbolsShape: custom shape for symbol: circle, x, square, cross, diamond, triangle_up, triangle_down, triangle_right, triangle_left. May be defined for each series of data with csv, eg.: symbolsShape= circle, cross, square
• symbolsNoFill: if true symbol will be without fill (only stroke),
• symbolsStroke: if "x" symbol is used or option "symbolsNoFill" symbol stroke width, default 2.5
• showValues: Additionally, output the y values as text. (Currently, only (non-stacked) bar and pie charts are supported.) The output can be configured used the following parameters provided as name1:value1, name2:value2:
  • format: Format the output according to https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#numbers for numbers and https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md for date/time.
  • fontcolor: text color
  • fontsize: text size
  • offset: move text by the given offset. For bar charts and pie charts with midangle this also defines if the text is inside or outside the chart.
  • angle (pie charts only): text angle in degrees or midangle (default) for dynamic angles based on the mid-angle of the pie sector.
• innerRadius: For pie charts: defines the inner radius to create a doughnut chart.
• xGrid and yGrid: display grid lines on the x and y axes.
• formatjson: format JSON object for better legibility

Template wrappers

The functions mapWrapper and chartWrapper are wrappers to pass all parameters of the calling template to the respective map and chart functions.

Note: In the editor preview the graph extension creates a canvas element with vector graphics. However, when saving the page a PNG raster graphics is generated instead. {{#invoke:Graph|function_wrapper_name}}